68acbb7c3f
rand_key: fix non-randomness in rand_key()
...
If rand_key() is called twive within the same second it would return the
same key both times. Not very random.
Redo how rand_key() works to make it more likely to be random and more likely
that two consequtive calls do not yield the same result.
Reported-by: CyberLoiter <yanming.xiao@gmail.com >
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2015-02-10 16:57:22 -08:00
58f06b0e74
TESTS: get rid of a sanitize helper
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-10-14 19:39:27 -07:00
8ac7d64082
TESTS: convert most of SANITIZE to new saner api
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-10-14 19:25:17 -07:00
14461757c4
TESTS: Allow Hardware/Software write protect as valid ASCQ
...
Add 0x2701/0x2702 to the list of valid ASCQ values we accept for devices
that are write protected.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-10-08 06:23:43 -07:00
45d87238e2
TESTS: Flag a whole bunch of tests as not supported on non-iSCSI backends
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-27 08:58:24 -07:00
abbf9a11b0
TESTS: change modeselect to become /dev/sg-aware
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-27 08:10:14 -07:00
55c1f0d2ec
TESTS: Add support to test against a /dev/sg device on linux
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-19 16:26:46 -07:00
48e14f5ccf
TESTS: update main program to use helpers instead of calling directly to libiscsi
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-19 06:21:02 -07:00
8ed2ad9b69
TESTS: start abstracting away the error string handling from transports
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-18 19:20:49 -07:00
072291c852
TESTS: change the function signatures for the helpers
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-18 18:19:04 -07:00
9b768f7de9
TESTS: move the default url, lun and iscsi context into a structure
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-18 16:42:45 -07:00
f015ab095a
TESTS: update reportsupportedopcodes to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
9be6ddaf09
TESTS: update inquiry to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
398f03205d
TESTS: update unmap to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
832d88797a
TESTS: remove the read10_task helper
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
9e75b10103
TESTS: change get_lba_status to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
fd21a8f2c4
TESTS: convert readcapacity to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
46eaa7dcc3
TESTS: convert compareandwrite to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
44d88e3bc6
TESTS: update synchronizecache to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
1c14b9b911
TESTS: update read6 to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
3ee3964332
TESTS: change testunitready to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:21 -07:00
fe11a6178b
TESTS: add ASCQ check to miscompare
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 13:12:59 -07:00
f1d198c684
TESTS: update startstopunit to use new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 13:12:58 -07:00
28b0a0ab11
TESTS: update the READ tests to the new API
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 13:12:58 -07:00
4b2e9bd417
TESTS: update the prefetch tests to the new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:08:02 -07:00
8585e4509b
TESTS: update writesame tests to new API
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:08:01 -07:00
d3f98dfdd5
TESTS: rework WRITEVERIFY* tests to the new API
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:07:59 -07:00
8ffd78c117
temp: redo the write10/12/16 commands to the new saner api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:07:57 -07:00
8aefc7d579
TEST: update all the verify tests to a new API
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:07:55 -07:00
138939cb0e
TESTS: change ORWRITE to use a single helper function for all
...
Switch orwrite helpers to use _command_async instead of calling _orwrite_sync()
to prepare for switching to non-iscsi targets. Use the new check_result API
so that we only need a single helper function for ORWRITE instead of one
helper for each expected result.
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:07:52 -07:00
905695575f
TESTS: add a new helper check_result to validate the result of SCSI helpers
...
Many/most all SCSI helpers do pretty much the same checking for the SCSI
result and status. Break this out into a separate helper that we can use
to reduce code duplication.
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:07:49 -07:00
8e4e03d85d
test-tool: allow get_lba_status to return provisioning type
...
Signed-off-by: Peter Lieven <pl@kamp.de >
2014-08-13 17:02:51 +02:00
b631a2146c
SPC-2 RESERVE tests: Use MODE SENSE instead of TEST UNIT READY
...
Although SPC-2 specifies that a reservation conflict should be
reported when TEST UNIT READY is received from another initiator than
the registered initiator, it is an established practice that TEST
UNIT READY is accepted in this case. Hence use the MODE SENSE command
to test the effect of the RESERVE command instead of TEST UNIT READY.
Signed-off-by: Bart Van Assche <bvanassche@acm.org >
2014-08-04 16:05:25 -07:00
cefb6a6127
TESTS: update the get_lba_status + unmap test to account for lbppbe
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-07-16 05:37:34 -07:00
879f542ebf
TESTS: CompareAndWrite are bounded by the max block setting in BlockLimits
...
Make sure that we check that a target returns an error if we try to compare and write too much.
2014-03-05 18:47:24 -08:00
8aa6d9de8f
TESTS: Add a test for COMPARE_AND_WRITE when the data to verify does not match
2013-09-23 21:58:55 -07:00
9f1a28f753
TESTS: Add an initial simple test for COMPARE_AND_WRITE
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2013-09-22 17:02:30 -07:00
e7df1af3b9
TESTS: READ10 and STARTSTOPUNIT should fail while sanitize is in progress
...
Other commands should fail too but we dont need to test them all
2013-07-21 14:33:22 -07:00
d901700633
Add a test that a sanitize operation will continue across resets
...
Verify that abort task/abort task set/lun reset/warm reset/cold reset
and full blown session failures will not affect a sanitize that is in
progress
2013-07-21 14:11:13 -07:00
a3283fbafd
TESTS: Add a test that SANITIZE fails when SWP is on.
2013-07-09 02:27:30 -07:00
6e5a5745aa
TESTS: Add a test that SANITIZE commands fail when there is a RESERVATION
2013-07-09 01:51:00 -07:00
e31e0ce58d
TESTS: Log when we skip tests on normal log level, not just for -V
2013-07-08 00:23:39 -07:00
6a65874dd9
TESTS: Add helper function for READ10 that returns a task*
2013-07-05 16:14:21 -07:00
d8d10c0a44
TESTS: Sanitize check that after block erase all blocks are unmapped
2013-07-05 16:04:29 -07:00
cb793f01f3
TESTS: Fix typo. s/allow_sanitize/allow-sanitize/g
2013-06-01 08:40:43 -07:00
10d101cf51
TESTS: Try reading the BlockDeviceCharacteristics VPD page on startup
2013-05-26 19:53:27 -07:00
b193e08be8
Tests: Update the SANITIZE tests
2013-05-26 19:36:35 -07:00
e5e8d7e3ef
TESTS: Add a simple test for SANITIZE OVERWRITE
2013-05-26 11:48:45 -07:00
eebd04e613
Add initial support for SANITIZE and a simple test to generate this opcode.
2013-05-25 16:02:02 -07:00
c9ee8525b2
TESTS: Add a test for the reprot one command reporting options for
...
REPORT SUPPORTED OPCODES.
Opcodes that are listed in the full list of all supported opcodes as taking
a service action should work to ask reporting option 2 (uses service action)
from but fail when asked for option 1 (no service action)
Similarly, opcodes that are flagged as not taking a service action should
work when used with option 1 but fail with option 2.
2013-05-19 07:27:33 -07:00
Ronnie Sahlberg