6412834754
TEST: Add test that invalid DATASN for DATAIN is detected as an error
...
Send a write containing two DATA-IN PDUs in a sequence but both PDUs have DATASN==0
This is an error and the target should react to this as an invalid command
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-08-10 16:08:55 +10:00
0cf42c3662
TESTS: Add a test for ISCSI CMDSN out of range
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-08-10 15:36:10 +10:00
1a387632a9
TEST: Use better default iscsi name for the test tool
2012-08-10 11:27:10 +10:00
d5d062a494
TESTS: For the invalid tests, treat the target dropping the session as OK
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-08-01 16:38:30 +10:00
77d8e41be7
TESTS: Add a mechanism to temporarily disable the session reconnect
...
Some tests may cause a target to drop the session.
For these tests we DO want the test tool to detect that the command
failed and later reconnect the session again when we proceed to the next subtest
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-08-01 16:32:40 +10:00
fbc4f3584b
TEST: Add initial test for "test that all mandatory SBC commands are there"
...
Some tests are just stubs since we underlying vommands have not been
implemented in libiscsi yet.
2012-07-22 08:52:25 +10:00
458c342839
typo
2012-07-22 07:37:04 +10:00
94cd6bf3b1
TEST: Add test that PREVENTs on different IT_Nexuses do not interfere
2012-07-21 15:04:53 +10:00
af9d3eab79
fix a typo
2012-07-21 12:27:51 +10:00
d8ed7d4053
TESTS, After a target/lun reset, wait until the lun stabilizes before continuing the tests
2012-07-21 12:26:24 +10:00
9205a71135
fix typo in test, we try to reset the LUN, not the target
2012-07-21 12:09:59 +10:00
313d579464
TEST: Add a test that a LUN reset will clear PREVENTALLOW
2012-07-21 12:05:25 +10:00
ca046ab342
TEST: add a test that a Cold Reset will clear PREVENTALLOW
2012-07-21 11:59:34 +10:00
7d0393452c
TEST: Add a test that PREVENTALLOW is cleared byb a warm reset
2012-07-21 11:53:26 +10:00
44bf8a5a3a
TEST: Add a test that a I_T_Nexus loss clears the PREVENTALLOW on that nexus
2012-07-21 11:17:09 +10:00
5953607743
TEST: add test that we can not eject media when PREVENTALLOW is set on the I_T_nexus
2012-07-21 10:43:33 +10:00
5cf3ccca75
TEST: Add simple test for PREVENTYALLLOWMEDIUMREMOVAL
2012-07-21 10:04:37 +10:00
b8e08a355d
TESTS: Add test for all media access commands that they fail correctly on ejected media
2012-07-18 08:03:29 +10:00
4a3935770d
TEST Add test for powercondition and eject
2012-07-16 21:43:27 +10:00
db68e68f6d
TEST: add simple test for STARTSTOPUNIT
2012-07-16 21:06:52 +10:00
1f40de8858
compiler warnings
2012-07-15 08:13:40 +10:00
e6ca1451b0
TEST add test for wrprotect field in ORWRITE
2012-07-14 18:38:48 +10:00
6bbbff64fd
Add some missing free calls
2012-07-14 18:10:04 +10:00
67f4ceca6b
Add COMPAREANDWRITE and ORWRITE to the readonly tests
2012-07-14 17:55:10 +10:00
030cb9134a
Add lba-out-of-range tests for ORWRITE
2012-07-14 17:45:43 +10:00
1a7a92024e
Fix typo in orwrite test
2012-07-14 17:30:57 +10:00
1ce5d97e57
TEST: Add test for ORWRITE command
2012-07-14 17:29:58 +10:00
bee944c3cc
update log message
2012-07-14 13:17:13 +10:00
b5a6f7c3cb
Bugfixes for the compare and write tests
2012-07-14 13:15:45 +10:00
17e3355dc2
TEST: Add tests for COMPAREANDWRITE
2012-07-14 13:06:24 +10:00
f6705d4691
TESTS: Add tests for writing beyond the end of the LUN for WRITEVERIFY10/12/16
2012-07-14 10:54:15 +10:00
477ee0f6f6
TEST: Add wrprotect tests for WRITEVERIFY10/12/16
2012-07-14 08:54:00 +10:00
df30827992
Add simple tests for WRITEVERIFY10/12/16
2012-07-14 08:41:04 +10:00
bae5ce4c14
TESTS: Add test that WRITEVERIFY* fails if the device is write-protected
2012-07-14 08:24:19 +10:00
eaff5a4e4e
TESTS: Add a test that write/unmap fails on read-only devices
2012-07-13 10:04:42 +10:00
c379a3eb27
TESTS: improve the output for some failures
2012-07-11 14:16:55 +10:00
a684094fbd
TEST: exit code is number of failed tests
...
exit code == 0 means all tests were successful
2012-07-11 13:07:24 +10:00
5dc8c7739f
Update usage page for the test tool
2012-07-10 19:25:26 +10:00
e5e4817331
TEST: Add --info to the help page for the test tool
2012-07-10 17:30:43 +10:00
f2a5ccb4f5
TEST: Allow --info to work when --list is used
...
iscsi-test --list --info
thus lists both all the major tests as well as all sub-tests
2012-07-10 17:27:24 +10:00
fbd6a9a960
Fix incorrect prontout on test failure. Wrong sense printed
2012-07-10 16:29:34 +10:00
ecbff226b8
Improve tests for READ10/READ12/READ16
2012-06-24 07:55:49 +10:00
27ea207fd4
Improve WRITE10/12/16 tests
2012-06-24 07:43:28 +10:00
7e0e732128
Add tests for writing 0 blocks with WRITESAME10/16
2012-06-24 07:30:03 +10:00
e7c8a173ab
Add tests for the WRPROTECT bits for WRITESAME10/16
2012-06-23 21:40:58 +10:00
124b71bd80
READ10 tests. Add tests fopr lba 2^31 an lba -1
2012-06-23 21:25:39 +10:00
14a70127ce
Add tests for WRITESAME10/16 for writing beyond the end of the device
2012-06-23 21:18:38 +10:00
04b5fc86d2
WRITE_SAME16 Tests update
...
Update the tests for write same 16 unmap to cover more cases
2012-06-17 21:32:56 +10:00
620ba234c3
WRITESAME10 UNMAP Tests updates
...
Make the WS10 tests more accurate for unmap operations and check for proper sense for invalid conditions, like unmap=0 and anchor=1
2012-06-17 21:27:22 +10:00
1d3e910769
TESTS: Add tests for WRITE10
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-06-05 19:36:25 +10:00
Ronnie Sahlberg