71be26ad03
Add tracking of MAXCMDSN
2012-08-02 09:09:22 +10:00
77d8e41be7
TESTS: Add a mechanism to temporarily disable the session reconnect
...
Some tests may cause a target to drop the session.
For these tests we DO want the test tool to detect that the command
failed and later reconnect the session again when we proceed to the next subtest
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-08-01 16:32:40 +10:00
1f98c40edf
DATASN: We have to increment DATASN in each DATA-OUT PDU in a sequence.
...
For writes that span across multiple DATA-OUT segments we have to
increment the DATASN field for each segment.
We didnt use to, and most targets were perfectly happy, ignoring that the DATASN was constant 0 for every DATAOUT we sent.
LIO however does check this and did cause it to reject the libiscsi test tool.
(This is something we should write a iscsi test for so we can flag all non-LIO targets as broken and needing to be fixed)
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-08-01 13:30:13 +10:00
2a15e39460
Add a new sense code
2012-07-30 07:38:38 +10:00
43bf059fca
Add ASCQ for MEDIUM_REMOVAL_PREVENTED
2012-07-21 10:28:32 +10:00
16da01ed4e
Add PREVENTALLOWMEDIUMREMOVAL support
2012-07-17 18:12:03 +10:00
025136e81c
Add support for STARTSTOPUNIT command
2012-07-15 08:10:39 +10:00
1ce5d97e57
TEST: Add test for ORWRITE command
2012-07-14 17:29:58 +10:00
11f7da678b
Add support for ORWRITE
2012-07-14 17:01:38 +10:00
017bb69ccd
Add new sense code for miscompare during verify
2012-07-14 12:49:42 +10:00
bac1d4d7af
We need to allow >uint8_t as xferlen since this is in unit of bytes, not blocks in the libiscsi api
2012-07-14 12:31:38 +10:00
bdd6e6bb11
Add support for COMPARE_AND_WRITE command
2012-07-14 11:34:40 +10:00
29f5e9378f
Add support for WRITEVERIFY10/12/16
2012-07-14 08:19:43 +10:00
1745f76bef
Add SYNCHRONIZECACHE16 support
2012-07-13 10:19:44 +10:00
a34874289b
Add ascq for WRITE_PROTECTED
2012-07-13 09:43:21 +10:00
3221e631c0
MODE_SENSE Add sync version of mode sense 6
2012-07-13 09:33:41 +10:00
6f4afb6edb
MEDIUM_NOT_PRESENT/TRAY-CLOSED/TRAY_OPEN is not an error that blocks a successful connect
2012-07-12 18:55:35 +10:00
cadc1650e1
Add ASCQ for MEDIUM_NOT_PRESENT
2012-07-10 16:40:58 +10:00
6edf993507
Make headers in include/ digestible for C++
...
Also removes trailing whitespace in these files.
Signed-off-by: Arne Redlich <arne.redlich@googlemail.com >
2012-07-08 13:38:41 +02:00
121e555897
slist.h: add include guards
...
Signed-off-by: Arne Redlich <arne.redlich@googlemail.com >
2012-07-08 13:34:22 +02:00
d5f646099d
READ10/WRITE10: Change these functions to sue the same signatures as the other READ/WRITE
...
Harmonize the signatures for READ10/WRITE10 to match the ones for READ12/16 and WRITE12/16
This breaks the API/ABI so this forces the next version of the library to bump the major version to 2.0
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-06-05 19:20:02 +10:00
9130d2eb45
Add support for VERIFY12 and tests
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-06-04 20:35:15 +10:00
6003000809
Add VERIFY16 support and tests
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-06-04 20:16:44 +10:00
812df62bfd
SBC: Add GET_LBA_STATUS support and simple test
2012-05-30 18:41:12 +10:00
ed4b8ec72e
W32: Remove our poor emulation of poll() from the w32 build.
2012-05-13 16:46:38 +10:00
aee0e3bf72
always export iscsi_set_tcp_keepalive()
...
Set only the (socket) options which are defined on a given platform.
The function becomes a no-op if no option is known at complie time.
Remove autoconf test for HAVE_TCP_KEEPALIVE too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru >
2012-05-12 08:41:34 +10:00
733b97f4b8
Add PREFETCH10/16 implementations
2012-05-03 06:21:49 +10:00
2e3126b9ac
TESTS: add tests for READ12/16 RDPROTECT for luns without protection information
2012-05-02 20:14:51 +10:00
974738968d
Implement READ/WRITE_12/16 and a simple test for read16
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-05-01 21:54:32 +10:00
9e5535adfd
Reconnect: If we are logged in and we experience a session failure, then
...
try to re-connect and redrive all I/O
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-05-01 18:46:30 +10:00
9c6447b73a
SENSE: add a sense key and an ascq
2012-04-28 15:03:43 +10:00
568e4ddfcc
SBC: Add support for WRITESAME16 and add simple tests using it to unmap blocks from a thin provisioned lun
2012-04-28 14:34:47 +10:00
cc0fa15e14
SBC: Add support for WRITESAME10 and a simple test for using writesame10 to unmap blocks from thin provisioned luns
2012-04-28 13:55:37 +10:00
dd5f94b2ca
Add support for UNMAP command and add a simple test for this opcode
2012-04-22 08:09:15 +10:00
d71a9d4f95
Add support for BLOCK LIMITS VPD page
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-04-20 17:57:40 +10:00
86bf89aabf
Add support for READCAPACITY16
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-04-20 17:56:39 +10:00
422bc32ce8
Add support for INQUIRY LOGICAL_BLOCK_PROVISIONING page
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2012-04-19 20:09:14 +10:00
50594830bd
Task Management. When we abort a task or a task set, or reset the lun or target
...
we must also cancel all active tasks.
This will trigger all affected tasks to have their callback invoked with
SCSI_STATUS_CANCELLED
2012-03-10 12:12:47 +11:00
2b521b4d24
TEST-TOOL: add test for read16/rdprotect
2012-02-05 07:56:35 +11:00
b4573178ca
TEST-TOOL: Add test for read12/rdprotect
2012-02-05 07:52:30 +11:00
cff996a96d
VERIFY10: Add support for VERIFY10. Also add a simple test for verify10
2012-01-26 15:47:14 +11:00
2f23773390
add sync write10
2011-09-29 22:01:53 +10:00
a1975e90f6
fix warning from -Wuninitialized
2011-09-21 12:00:20 +02:00
b4a48511ff
fix warning from -Wenum-compare
2011-09-21 11:49:58 +02:00
3c11c3598b
Add a function to cancel a scsi task from libiscsi.
2011-09-19 21:21:40 +10:00
c3d3123981
Windows: Add support to build as a DLL under windows
2011-08-31 13:12:30 +10:00
de97dbdde8
start implementing mode page unmarshalling
2011-04-23 14:02:59 +10:00
7a4b1d2640
Fix documentation of how to use 'zero-copy' reads.
...
The function to specify the read buffers is called
scsi_task_add_data_in_buffer, not scsi_task_add_data_buffer
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2011-04-22 07:51:47 +10:00
3a39201543
Add 'zero-copy' in libiscsi for reads.
...
It is not real zero-copy since the data is still copied in the kernel,
but it avoids copying the data inside libiscsi as well as in the callback.
For SCSI tasks that will return data from the target, the application can now
specify application buffers for libiscsi to read the data directly into.
This is done by calling scsi_task_add_data_in_buffer(task, ...
These buffers need not be linear, you can specify different areas to read into
by calling this function several times.
See examples/iscsiclient.c for an example.
2011-04-20 05:46:17 +10:00
f4ef49e068
Add missing prototype for the read6 cdb function
2011-04-16 16:29:00 +10:00
Ronnie Sahlberg