38798e2090
initialize task->datain.data to keep valgrind happy
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-21 15:10:38 -07:00
2af45d9ad4
initialize sense to keep valgrind happy
...
valgrind does not know that sense will be initialized by the ioctl
so we need to to it explicitely to keep it from warning us.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-21 14:58:12 -07:00
d11e4175f7
TESTS: Dont memcpy if task==NULL
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-19 17:33:21 -07:00
1e3cc445c8
TESTS: Remove some tests that wont work yet for /dev/sg
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-19 17:15:48 -07:00
55c1f0d2ec
TESTS: Add support to test against a /dev/sg device on linux
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-19 16:26:46 -07:00
48e14f5ccf
TESTS: update main program to use helpers instead of calling directly to libiscsi
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-19 06:21:02 -07:00
8ed2ad9b69
TESTS: start abstracting away the error string handling from transports
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-18 19:20:49 -07:00
5efc7bf925
TESTS: create a helper/wrapper for sending scsi commands
...
Create a wrapper for sending scsi_commands so that we can hide the
libiscsi function far away from the "opcode" helpers.
This means we only have a single place later to switch to a different
type of device, such as a SG_IO one.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-18 18:52:08 -07:00
072291c852
TESTS: change the function signatures for the helpers
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-18 18:19:04 -07:00
9b768f7de9
TESTS: move the default url, lun and iscsi context into a structure
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-09-18 16:42:45 -07:00
f015ab095a
TESTS: update reportsupportedopcodes to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
9be6ddaf09
TESTS: update inquiry to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
398f03205d
TESTS: update unmap to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
832d88797a
TESTS: remove the read10_task helper
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
9e75b10103
TESTS: change get_lba_status to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
fd21a8f2c4
TESTS: convert readcapacity to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
46eaa7dcc3
TESTS: convert compareandwrite to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
44d88e3bc6
TESTS: update synchronizecache to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
1c14b9b911
TESTS: update read6 to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:22 -07:00
3ee3964332
TESTS: change testunitready to new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 14:07:21 -07:00
fe11a6178b
TESTS: add ASCQ check to miscompare
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 13:12:59 -07:00
f1d198c684
TESTS: update startstopunit to use new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 13:12:58 -07:00
28b0a0ab11
TESTS: update the READ tests to the new API
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 13:12:58 -07:00
4b2e9bd417
TESTS: update the prefetch tests to the new api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:08:02 -07:00
8585e4509b
TESTS: update writesame tests to new API
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:08:01 -07:00
d3f98dfdd5
TESTS: rework WRITEVERIFY* tests to the new API
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:07:59 -07:00
8ffd78c117
temp: redo the write10/12/16 commands to the new saner api
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:07:57 -07:00
8aefc7d579
TEST: update all the verify tests to a new API
...
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:07:55 -07:00
138939cb0e
TESTS: change ORWRITE to use a single helper function for all
...
Switch orwrite helpers to use _command_async instead of calling _orwrite_sync()
to prepare for switching to non-iscsi targets. Use the new check_result API
so that we only need a single helper function for ORWRITE instead of one
helper for each expected result.
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:07:52 -07:00
905695575f
TESTS: add a new helper check_result to validate the result of SCSI helpers
...
Many/most all SCSI helpers do pretty much the same checking for the SCSI
result and status. Break this out into a separate helper that we can use
to reduce code duplication.
Signed-off-by: Ronnie Sahlberg <sahlberg@localhost>
2014-09-18 12:07:49 -07:00
8e4e03d85d
test-tool: allow get_lba_status to return provisioning type
...
Signed-off-by: Peter Lieven <pl@kamp.de >
2014-08-13 17:02:51 +02:00
b631a2146c
SPC-2 RESERVE tests: Use MODE SENSE instead of TEST UNIT READY
...
Although SPC-2 specifies that a reservation conflict should be
reported when TEST UNIT READY is received from another initiator than
the registered initiator, it is an established practice that TEST
UNIT READY is accepted in this case. Hence use the MODE SENSE command
to test the effect of the RESERVE command instead of TEST UNIT READY.
Signed-off-by: Bart Van Assche <bvanassche@acm.org >
2014-08-04 16:05:25 -07:00
d6af861c57
iscsi-test: check for invalid descriptors offsets in get_lba_status
...
Dell Equallogic sans report an invalid LBA offset in the descriptor when
using 4k LUNs. Check the descriptor for consistency with the request.
Signed-off-by: Peter Lieven <pl@kamp.de >
2014-07-10 14:44:16 +02:00
69c466a6c9
- writesame10 and writesame16 were looking at the datalen, when they wanted to be looking at the number of blocks
2014-05-07 13:49:25 -04:00
717b95cb8a
slist.h: rename SLIST_ to ISCSI_LIST_ to avoid clash on *BSD
...
Rename the macros for managing the linked lists from SLIST_* to ISCSI_LIST_*
to avoid a clash on *BSD which already have other macros SLIST_*
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2014-05-07 06:44:19 -07:00
e8545d6a03
verify1[02]_invalidfieldincdb(): Fix an error message
...
Signed-off-by: Bart Van Assche <bvanassche@acm.org >
2014-03-15 08:45:21 -07:00
b0dbecaff7
TESTS: compare and write: Invalidfieldincdb is illegal-request, not miscompare
2014-03-06 17:30:46 -08:00
879f542ebf
TESTS: CompareAndWrite are bounded by the max block setting in BlockLimits
...
Make sure that we check that a target returns an error if we try to compare and write too much.
2014-03-05 18:47:24 -08:00
e1659b1973
TESTS: Fix WRITESAME tests to handle targets that don't like datalen == 0
...
Recent SBC specs say (when the WSNZ bit is set to one and the NUMBER OF LOGICAL
BLOCKS field is set to zero) or (if MAXIMUM WRITE SAME LENGTH is greater than 0
and the number of logical blocks specified to be written exceeds the MAXIMUM
WRITE SAME LENGTH) the server should terminate with CHECK CONDITION, set the
sense key to ILLEGAL REQUEST and the additional sense code to INVALID FIELD IN
CDB.
Update the WRITESAME tests to cope with this.
2014-01-25 05:37:45 +00:00
120b308741
Spelling fixes: Dont => Don't
...
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru >
2013-12-16 18:19:24 -08:00
9c7092e85c
test tool: Fix a memory leak in testunitready_clear_ua()
...
Avoid leaking 'task' if task->status != SCSI_STATUS_GOOD.
Signed-off-by: Bart Van Assche <bvanassche@acm.org >
2013-10-23 05:34:36 -07:00
8aa6d9de8f
TESTS: Add a test for COMPARE_AND_WRITE when the data to verify does not match
2013-09-23 21:58:55 -07:00
9f1a28f753
TESTS: Add an initial simple test for COMPARE_AND_WRITE
...
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com >
2013-09-22 17:02:30 -07:00
e7df1af3b9
TESTS: READ10 and STARTSTOPUNIT should fail while sanitize is in progress
...
Other commands should fail too but we dont need to test them all
2013-07-21 14:33:22 -07:00
d901700633
Add a test that a sanitize operation will continue across resets
...
Verify that abort task/abort task set/lun reset/warm reset/cold reset
and full blown session failures will not affect a sanitize that is in
progress
2013-07-21 14:11:13 -07:00
b1b3c603af
TESTS: clear unit attention after changing SWP settings in the readonly test
2013-07-21 09:20:00 -07:00
52a83e91af
Add POWER_CONDITION modepage marshalling/unmarshalling
2013-07-20 15:35:38 -07:00
a3283fbafd
TESTS: Add a test that SANITIZE fails when SWP is on.
2013-07-09 02:27:30 -07:00
6e5a5745aa
TESTS: Add a test that SANITIZE commands fail when there is a RESERVATION
2013-07-09 01:51:00 -07:00
6a65874dd9
TESTS: Add helper function for READ10 that returns a task*
2013-07-05 16:14:21 -07:00
Ronnie Sahlberg